Varec Network Adapter 4000, Installation And Operation Manual, Page: 29 / 80

19
4000 Configuration
4
Only displayed if host interface type is Mark/Space
5 Only displayed if host interface type is Modbus
6 Only displayed if host interface type is Modbus or Mark/Space
7 Only displayed if there is no temperature sensor
3.5 Quick Setup
The Quick Setup option is meant to get the ATT configured quickly and with some
defaults. It is NOT likely that this configuration will match your installation exactly.
However, after the Quick Setup option is selected, go through the 1200 Hand Held
Terminal menus to see and modify any parameter. Quick Setup simply gives a starting
point.
Warning! The Quick Setup option erases all previous configurations in the ATT's EEPROM. If
using the quick setup command from the 1200 Hand Held Terminal and your mind
changes, simply exit the 1200 Hand Held Terminal Main Menu using the QUIT
command. This works since no configuration is changed or used unless the EXIT
AND SAVE command is executed from the Main Menu.
Please note that Quick Setup also configures all alarm setpoints to such values as not to
generate alarms. Modify the alarm setpoints to match your tank dimensions and your
product.
The quick setup default configurations are:
•
Imperial fractional 1800
•
Imperial decimal 1800
•
0-20 meters 1800
•
0-30 meters 1800
•
Imperial fractional 1900
•
Imperial decimal 1900
•
0-20 meters 1900
•
0-30 meters 1900
•
Imperial Modbus
•
Metric Modbus
•
Matrix 1600 Metric
•
Matrix 1600 Imperial
•
Matrix 1700 Metric
•
Matrix 1700 Imperial
•
Matrix 1700 Metric0-20 meters
•
Matrix 1700 Imperial 0-30 meters
•
Matrix 2400 Metric 0-20 meters
•
Matrix 2400 Imperial 0-30 meters
•
LNJ Metric
•
LNJ Imperial
•
Whessoe Bus Matrix
•
Whessoe Bus Imperial
•
GSI Modbus integer scaled
•
GPE loop