14
Vermiculite
The panels in the combustion chamber are know n as vermiculite panels and they
become worn over time. The smoke guide plate also becomes worn.
You only need to replace the panels if the crack is more than about ½ cm wide.
Vermiculite
A special fireproof material made of compressed stone granulate, which looks like fibreboard.
The panels are insulating and ensure that the stove does not wear out. Vermiculite panels are
not covered by the warranty.
Vermiculite is a very porous material and must be handled with care.
Only original spare parts from Varde Ovne A/S may be used.
1. Smoke guide plate
2. Top rear plate
3. Rear plate
4. Rear left side plate
5. Back right side plate
6. Front right side plate
7. Front left side plate
How to replace the vermiculite cladding
1. Raise the top rear panel (2) and tip out the front side panels (6 and 7).
2. The rear side panels (4 and 5) can now be tipped out.
3. Unscrew the two screws that hold the rear panel (3).
4. Raise the rear panel (2), then pull the rear panel (3) including the air rail out horizontally.
5. Now remove the rear panel, by taking out diagonally.
6. Push the smoke guide back against the rear wall in the stove and then edge out diagonally.
To fit, repeat the procedure in reverse.
1
2
3
4
6
7
5
Summary of Contents for Lyon
Page 19: ...19...
