NEES-04
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
T: 00352/26908036 – F: 00352/26908040
OPERATION
MAINTENANCE
•
Bolt the two 390mm castor wheels (17) to the front legs (14) using bolts (15) and nuts (18).
•
Attach two 75mm castors (11) to the rear of legs (14), using nuts (13), and lock washers (20).
•
Assemble two legs (14) to the rear beam (10) using bolts (19),nuts (13) and flat washers(12).
•
Attach the main post (03) to the rear beam (10) using bolts (09), and bolt (19) nuts (13) and flat
washers (12).
•
Insert the engine mounting plate (06) through the tube at the top of the main post.
•
Rotate the plate till one of the holes in the inner tube is aligned with a hole in the outer tube and
insert the ringed pin (01).
•
Insert the handle (02) through the hole in the turning plate tube which protrudes from the top off
the main post.
•
Attach the shifting stands (07) to the rotating head (06) using bolts (08), flat washers (05) and nuts
(04).
•
Check all bolts for tightness before operating.
BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as cracked joints
and damaged, loose, or missing parts.
This Engine Stand should always be stored in a dry location on a level surface.
Replace or repair damaged parts. Use recommended parts only. Non-authorised parts may be dangerous
and will invalidate the warranty.
Keep the stand clean for best and safest performance.
Any Engine Stand found damaged in any way, or found to be worn or operates abnormally should be
removed from service until repaired by an authorised service agent.
Owners and / or operators should be aware that repair of this product may require specialised equipment
and knowledge. Only authorised parts, labels and decals shall be used on this equipment. Annual
inspection of the engine stand is recommended and can be made by an authorised repair facility to ensure
that your equipment is in optimum condition and that the equipment has the correct decals and safety
labels specified by the manufacturer.
ASSEMBLY INSTRUCTIONS
