Vaporless ISM-4080, Installation & Operation Manual

Page: 12 / 24

12
Push
MENU
P=1 T=1L PRES=HI
MONITOR AL=N
This concludes the setup of the ISM-4080. The above screen should rotate through the active products.
G
ENERAL
A
LARM
S
TATUS
D
ETAILS
:
When an alarm condition is recognized by the ISM-4080 it is an indication of failure to build line pressure
/ failure to detect flow. This may be due to many mechanical or electrical problems including:
•
Line leak
•
Pump motor failure
•
Motor starter contactor failure
•
Low Fuel
SUMP SENSOR ALARM DETAILS:
If your site has (optional) sump sensors integrated into the ISM-4080 System. When the presence of liquid
is detected by the sump sensor, the system will not allow the turbine to operate in the sump where the
liquid is detected until the fault condition is corrected. In other words, you must remove the liquid from
the sump with the sump alarm in order to enable operation for the turbine in the affected sump.
If you wish to retrofit sump sensors into the ISM-4080 system at a later date, please consult VMI so that
we can ensure proper configuration of the ISM-4080 system.
Please feel free to contact VMI for additional diagnostic/programming assistance.