Vaporetto SMART MOP, Instruction Manual

Page: 11 / 19

2. CONNECTION OF ACCESSORIES
2.1 To attach the extension
hose to the flexible hose and
the floor brush, simply insert
until you hear the button
click indicating that the
accessory is locked in place .
To release the accessories
simply hold the button down and separate the
components. Before using the accessories,
make sure that they are firmly in place.
2.2 To connect the small
brush, the steam
concentrator, the brushes
to the flexible hose or to
the extension tubes insert
the accessories and then
turn them until they are
locked in place.
3. STEAM ADJUSTMENT
You can optimise the
steam flow by means of the
steam adjustment knob.
You can increase the steam
flow by turning the control
in anti-clockwise direction.
Turning it in a clockwise
direction reduces the steam flow. Here are
some suggestions for the choice of steam
flow level:
• Maximum level: for encrusted dirt, stains, sa-
nitizing, grease.
• Medium level: for carpets, rugs, glass, tiles etc.
• Minimum level: for vaporising plants and
cleaning delicate fabrics, upholstery, wallpa-
per, parquet, laminate, etc.
4. CLEANING FLOORS
4.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tubes.
4.3 Attach the supplied
cloth to the floor brush. To
make it easier to attach, the
cloth has an easy
lock/release system to
avoid having to bend over
and use your hands. Just
place the cleaning side of the cloth on the
floor and rest the brush on top.
4.4 Adjust the intensity of the steam by tur-
ning the adjustment knob; for this type of sur-
face we recommend Medium level steam.
4.5 Deactivate the steam lock and continue
with steam delivery, pressing the steam trigger
on the handle of the steam hose.
4.6 Clean the floors by moving the brush.
The brush has a flexible joint that makes it
possible to easily reach the most difficult-to-
reach areas (under furniture, under beds, etc.).
The brush has bristles built
into the rear side ideal for
removing the most
stubborn dirt. To use, return
the handle to the vertical
position locking the brush,
then tilt until the bristels
are touching the floor and scrape off the dirt.
WARNING: For additional safety, test steam
delivery on a hidden section of the flooring,
leave the steamed part to dry to ensure that
no changes in colour or deformations have
occurred.
WARNING: Do not use the appliance
without the cloth.
WARNING: When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
Direct the first steam jet onto a rag for a few
seconds.
WARNING: if steam is escaping from the sa-
fety cap, switch the appliance off and unplug
it from the mains. Wait for two hours for the
appliance to cool before unscrewing the cap
and screwing it back on.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
After which, rest a foot on the tab of the
cloth sticking out and pull the brush upward.
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
WARNING: In case of excessive humidity,
reduce the quantity of steam.
| 11 |
ENGLISH
VT SMART MOP NA - M0S11490 - 1Q09:FEV 1000-950.qxd 16/09/2016 17.38 Pagina 11