Vaporetto FIRST, Instruction Manual

Page: 22 / 84

藐
• Before turning on the appliance, check that there is nothing
blocking the mouth of the boiler (filler bottle, funnel, or other
objects), and that the safety cap is closed.
• Check that the safety cap is correctly tightened; if steam is
escaping from the cap, switch off the boiler, unplug the
power cable, wait for two hour for the appliance to cool, and
then unscrew. Check the condition of the safety cap and seal.
If the cap is in good condition, screw it back on completely. If
steam continues to escape from the cap, take the appliance
to the nearest authorised service centre.
• Periodically check the condition of the safety cap and seal.
Impact and being dropped may compromise the safety of the
cap. Replace with an original spare part or replace the seal.
• If the cap spins freely, this indicates that the boiler is still
pressurised and therefore hot. Never force the cap open,
whether the appliance is switched on or the boiler is switched
off and the appliance is disconnected from the mains. Always
wait for the boiler to cool, opening the cap without force.
• Do not use tools to unscrew the cap. If the cap cannot be re-
moved, even once the appliance has cooled, go to your nea-
rest authorised service centre.
• WARNING Never fill the boiler as soon as the safety cap
has been opened when the boiler is still hot, even if the ap-
pliance is unplugged from the mains. On contact with the hot,
empty boiler, cold water will evaporate producing a spray of
steam which can cause burns. Only fill the boiler when cold
and always keep your face away from the boiler mouth when
filling.
• The use of non-original Polti caps and disregard for the in-
structions in this manual constitutes improper use. Polti
S.p.A. declines all liability for any accident deriving from any
improper use of this appliance.
• Steam may be released even if the appliance is disconnected
from the mains. Before put the appliance away, please first
press the lever until the steam flow ceases.
• During use, do not tilt the appliance more than 45°, in order
to avoid over heating. If necessary, use the flex keeping the
product horizontal
E
N
G
LI
SH
| 22 |
VAPORETTO DIFFUSION - FIRST - M0S11096 - 1Q12_FEV 1000-950.qxd 18/01/2017 14:41 Pagina 22