Vaporesso GEN PT60, User Manual

Page: 6 / 56

4 ENGLISH
PROTECTIONS
5. Power on the Device
Click the power button 5 times in 2 seconds to power on or
power off the device.
6. Power Adjustment
GEN PT60 is using the powerful GTX coil platform, and the
suggested power need to be noticed before start vaping.
7. Start Vaping
Press the power button to enjoy extraordinary vaping
experience.
8. Charge the Battery
After connecting the Type-C cable to the battery, the battery
indicator and remaining charging time will be showed on
the screen.
9. Settings
SYSTEM LOCK/UNLOCK: Press power button 3 times.
PUFF: To clear the puff counter, please press power button
and “-” button;
Flip Screen: To flip the screen direction, please press power
button and “+” button.
Press “+”and “–” buttons together to enter the setting
interface.
VW: Wattage adjustment mode;
VV: Voltage adjustment mode;
SMART VW: The power of device will be adjusted
automatically according to the coils;
DEFAULT: Restore factory settings;
EXIT: Back to main interface.
GTX MESH Coils GTX 0.2Ω MESH GTX 0.4Ω MESH
Suggested Power 45-60W 26-32W
Protections Situation
USB Input Protection The USB input voltage is too high.
Low Battery Protection The battery drops too low.
No Load Protection The device detects no cartridge on
the battery.
Short-circuit Protection The device detects a short circuit.
Overtime Protection Constantly vape for more than 10
seconds.
Overheat Protection The device detects an overheated
PCBA.