Vaporesso FORZ TX80, User Manual

Page: 4 / 64

1 English
E N G L I S H
EXPLODED VIEW
Drip Tip
FORZ Tank 25
Glass Tube
Rubber Case
Air-inlet Ring
Power Button
0.69“ OLED Screen
“+” Button
Type-C USB Port
“-” Button
Mode/Confirm
Battery Cap
USE INSTRUCTIONS
1. Install the Tank
Install the tank to the battery by screwing the 510 thread. Make
sure they are firmly connected.
2. Replace the Coil (Please check the Figure 1 on page 1)
- Unscrew the thread base from the tank;
- Pull out the used coil in the tank;
- Install a new coil to the tank;
- Reattach the thread base into place.
3. Fill the E-liquid (Please check the Figure 2 on page 1)
- Unscrew the top cap from the tank;
- Fill e-liquid through the two filling slots;
- Reattach the top cap back into place;
- Please wait 5 minutes for the e-liquid to soak into the coil
completely.