Vapor Clean Blue Evolution, User Manual

Page: 7 / 18

The Blue Evolution’s Extraction feature
allows the user to clean with hot water.
Extraction increases cleaning
performance, and when used with the
Vacuum , leaves a relatively dry surface.
Ø
Activate the Extraction by pushing
the button on the hose handle.
Ø
Turn ON the Vacuum by pushing
vacuum symbol on the hose
handle.
Ø
The symbol will illuminate on
the display while the Blue Evolution
is in
Extraction mode.
Ø
You will hear the pump when
activated.
Ø
Extraction spray can be increased or
decreased in 10% increments by
pushing button on the console.
Ø
Default Setting: 60%
Ø
010 - Lowest Setting minimum
amount of water
Ø
100 - Highest Setting Maximum
amount of water
Ø
To turn OFF the Extraction and
return to Steam only, push the
button on the hose handle.
Vacuum
Extraction
Extraction Shut Down
After Each Use:
It is important to clean accessories and
brushes.
Ø
Run the vacuum for 30 seconds to
remove any water from the hose.
Ø
Use hot soapy and water to clean
brushes and nozzles.
Ø
Empty and use hot soapy water to
clean the collection tank and
remove all debris.
Ø
If using the Blue Evolution on an
extremely dirty or greasy surface,
clean hose after use by activating
the vacuum mode and suck water
through the hose on low suction.
Ø
If working in a healthcare
environment, the hose can be
cleaned with a disinfection
solutions.
Every 3 Months
Ø
Check Boiler cap and descale (see
Page 13).
Ø
Descale the reservoir tanks and
boiler. (see page 12).
Ø
Check HEPA filter clean or replace.
(see page 10).
Ø
Check O-Rings on hose and
extension wands. If damaged,
replace.
Every Year
Ø
Replace HEPA filter
Ø
Change the O-Rings on the hose
and extension wands (page 10)
7