© 2014 JTBD Limited. All rights reserved.
7
3.
Refill two thirds (if you overfill the cartridge the atomiser spike will be
trapped in an air bubble and the device will not work) of the cartridge
with your favourite fluid and replace the rubber cap. Now slide the
cartridge back into the unit, twisting to ensure it is sealed.
Note: The first time you fill your Smini (or change the atomiser
pg 4
) it will
take a few draws for the liquid to soak through to the vaporising atomiser. We
recommend leaving the Smini standing on the light indicator for a few minutes
to allow the fluid to soak into the atomiser.
Cleaning.
The Steamoon Smini is a quality product that uses intricate technology. In
order to maintain the performance of the unit you must clean the individual
parts regularly.
We recommend the Smini is cleaned at least once every three days.
Dismantle the Smini and wipe down all internal and external surfaces. Ensure
any liquid is removed from the surfaces of the product.
Cartridge Replacement.
Although the cartridge can be broken up to clean it should be replaced at least
every week.
Note: The rubber cartridge caps are designed for very limited use. With care,
the caps can be used repeatedly. If you begin to experience leaking around
the atomiser you will need to replace the cartridge.
