© 2014 JTBD Limited. All rights reserved.
5
3.
Replace the middle disc and screw the atomiser unit onto the battery
4.
Add fluid to the cartridge till it is two thirds full (
pg. 6
) and, if it is the first
time using the cartridge, make a small hole in the rubber plug with a
pin. It is recommended that you stretch the hole out to around twice the
diameter of the pin:
Note: If the hole is not large enough the atomiser spike will not
enter the cartridge. If the atomiser is not inside the cartridge the
user will experience a burnt taste and the unit will produce little,
if any, vapour.
5.
While keeping the cartridge upright, insert the cartridge into the
atomiser casing.
Changing the Atomiser.
An atomiser will generally last between 1 - 2 months if used correctly.
1.
Remove the atomiser from the black plastic casing and drop 2 – 3
drops of liquid onto the spike and let it soak in to the atomiser (
pg. 4
).
2.
Remove the cartridge from the unit
3.
Remove the atomiser unit and untwist the middle disc from the
atomiser casing
