BATTERY OPERATION AND SET TEMPERATURE MEMORY
DIRECTIONS FOR USAGE
5.
Once the unit has reached the desired temperature and is fully
pre-heated, you can remove the top by gently twisting
counter-clockwise - exposing the herb chamber. Once the top is
removed, you can insert your pre-ground herbs into the unit, making
sure the herb chamber is no more than 3/4 full*
*If you over fill the herb chamber you will impede the air flow, which will
prevent the heat from penetrating your herbs and thus prohibit full
vaporization from occurring.
6.
Immediately after the herbs have been placed into the herb
chamber, you can re-attach the mouthpiece by gently turning
clockwise until it is securely attached. Once the top is attached, you
can inhale and enjoy!
For optimal performance make sure to clean the unit after each
usage.
Locating Re-Chargeable Battery -
Lithium Ion Battery can be easily inserted
or removed by opening the door at the base of the unit.
Initial Battery Usage/Charging -
Prior to using the NO2 in Battery Mode the
battery must be charged for a full 8-12 hours for optimal battery
performance. Subsequent charging of battery is only 4-6 hours.
Re-Chargeable Battery Usage -
After the internal battery has been properly
charged and installed into the unit; unplug the unit from the wall adaptor
located at the base of the unit. When you power the unit on, battery power
will automatically take over and you can use your unit cordless.
Re-Chargeable Battery Charging -
The NO2 comes with two different ways
you can re-charge your internal re-chargeable battery.
1.
You can leave the battery inside the NO2 while it is plugged into an electrical
wall outlet using the power adaptor. If the NO2 is powered on while plugged
into an electrical wall outlet, even if the unit is being used, the battery will
automatically re-charge! In order for the battery to re-charge, the unit needs to
be plugged in and the Power ON/OFF switch needs to be in the ON position (the
heat does not need to be engaged).
2.
For optimal battery life automatic re-charging only occurs when the battery
charge is at 2 bars or less. To over-ride simply switch the unit OFF and then ON
to begin re-charging.
3.
The NO2 also has an optional external battery charging cord which is
available for purchase.
Re-Chargeable Battery Charge Indicator -
The NO2 comes outfitted with a
battery charge indicator located at the lower right hand corner of the
digital LCD Display. This indicator will display how much charge the battery
has remaining and will blink to indicate that it is recharging. Battery lasts
approximately 45-60 minutes on a full charge, battery indicator bars may
show less during actual usage; this is normal.
Set Temperature Memory -
The NO2 also comes with a temperature
memory, every time you turn your NO2 on, it will automatically be set to the
temperature you had used during you last vapor session.
Changing Temperature from Fahrenheit to Celsius -
To change the
temperature reading from Fahrenheit to Celsius (or from Celsius to
Fahrenheit) simply hold down the heat button 2-5 seconds.
5
6
