Vapir Digital Air, User Manual

Page: 7 / 20

A
C
B
When the battery is fully
charged, the red LED light turns
off, and a green LED will turn
on, indicating that charging is
complete.
Battery-Powered Operation
Charging the Battery
Be sure the device is set to CHA.
Unit will not charge in BAT or
ADP mode. Switch the slide
switch at the bottom of the unit
to the far right position (CHA).
Plug the power adapter into the
DC power in the Vapir™ unit. The
red LED light behind the LCD digi-
tal screen will turn on, indicating
that charging is in progress.
CHARGE BATTERY FOR 12 HOURS BEFORE FIRST USE
FOR MAXIMUM BATTERY LIFE. See battery and charger
instructions for optimum charging times.
*Note: When unit is not fully charged it may take longer to
vaporize herbs. Optimal results are achieved when the unit is
fully charged or plugged into a power adapter.
Changing from Fahrenheit to Celsius
A
Slide switch to adapter or bat-
tery mode.
Corded models:
switch to ‘ON’ position.
Your unit has the capacity to read the temperature in both
Fahrenheit and Celsius.
Press and hold “Heat” button
for 1 second.
B
C
Press + or - to choose °C or °F
display. Press ‘HEAT’ button to
complete your section.
DIRECTIONS FOR USE
DIRECTIONS FOR USE
Manual Heat Regulation
Your unit comes equipped with digital heat controls. However, the heat
can also be regulated manually. Wait for vapor/aroma to form (usually 2-3
minutes, depending on material used). When you see visible vapors,
immediately press the heat button to turn heater off and to prevent over-
heating of materials before enjoying the aroma. When you are ready to
enjoy the aroma, press the heat button again until more vapor appears;
then press heat again to turn heater off before enjoying aroma. Repeat as
necessary. Similarly, you can eject the herb drawer immediately after each
use (several times during one session) for maximum effect.
Note: It is best to leave the fan on for at least 2-5 minutes after use in
order to cool the heater. You can, in fact, leave your fan on indefinitely,
and so long as you have power, it can do no harm to the unit and will actu-
ally help keep dust and debris out of your unit. Make sure, however, that
the heater is off when the unit is not in use.
9 8