12
Repeat dripping 4 or so drops down the inside edge of the cartomizer. Then blow again from the top of
the carto. Repeat these steps several times until liquid begins to come out the small holes on the side of
the barrel. Once liquid begins to appear, wipe off the bottom of the cartomizer with a paper towel, and
while holding the paper towel on the bottom of the carto, give one more gentle blow, this time from the
threaded side to clear out any liquid in the air-path. You should be able to point the cartomizer at a light
and see light clearly all the way through the center of the cartomizer.
Now you’re ready to assemble. Take the vapor tank in one hand and find the end with the recessed lip.
That’s the bottom.
The cartomizer must only be inserted into the end with the recessed lip.
Summary of Contents for Fogbank
Page 1: ...v1 3 ...
