10
To begin using your vapor tank, first remove the tip by gently pulling and twisting, then pull the cartomizer
from the bottom of the tank to fully remove it. You can thread the cartomizer into the battery to aid in
removal. Use caution not to activate the unit.
Attempting to use a cartomizer when it is dry will result in damage or failure of the cartomizer coil. Make
sure to keep it wet with e-liquid!
A vapor tank cartomizer is made up of a stainless steel barrel with a ring of wicking material inside. At the
center of the wicking material is a coil. At the very center of the cartomizer is an air path. It is important
to keep the air-path clear.
The cartomizer must be pre-loaded to prevent damage, or burning of the wicking material. Take the
cartomizer in one hand and a bottle of e-liquid in the other with a clean paper towel nearby. Hold the
cartomizer at a 45 degree angle and carefully drip e-liquid down the inside lip of the barrel to reach the
wicking material. About 4 drops is good to start. We are attempting to wet the wicking material without
getting liquid in the air-path.
Summary of Contents for Fogbank
Page 1: ...v1 3 ...
