BEDBUG - DUST MITES - ALLERGENS
Fig.26
Fig.27
The detail adaptor can also be used on its own as a
straight jet nozzle tool or along with the 90 degree jet
nozzle attachment. These tools are great for cracks and
crevices. Make sure to concentrate the steam directly on
the area to be treated with as minimal distance as
possible, no more than 1’’ away. The steam will condense
and cool off and not be effective to kill pests and their
eggs if the jet tip is not directly on the surface being
treated. The detail adaptor can be attached directly to
the steam gun or to any of the extension tubes. (Fig. 28)
WHY USE STEAM?
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
The Vapamore MR-100 Primo produces steam with an output temperature between 210˚
to 220˚ degrees. Pests such as bedbugs, dust mites and other allergens along with their
eggs are killed on contact at a temperature of 180˚ degrees. Using steam is an extremely
effective and chemical free way to kill these pest along with E. Coli, Salmonella, H1N1 and
other bacteria or viruses without leaving any harmful chemical residue behind. The tools
supplied with the Vapamore MR-100 Primo allow you to treat all areas where these pests
can hide such as bedding, sofas, furniture, pillows, carpet, cracks and crevices that are
ideal hiding places for pests.
BEDDING / FURNITURE
Fig. 25
The clothes / fabric tool with the cotton cover is ideal for
treating bedding, furniture, pillows, and carpet areas
around bed posts and base boards. Start by installing
the supplied cotton cover on the clothes - fabric /
smooth surface tool. Apply light consistent pressure and
slowly pass it along the surface (1” per second) to insure
the area being treated has a chance to come to full
temperature killing pests and their eggs. (Fig.25)
The floor cleaning head with micro fiber cover is also
great for treating large surface areas such as bedding,
furniture, and carpet areas. Start by installing the
supplied micro fiber cover on the floor cleaning head.
The micro fiber cover thermal core maintains full
temperature during use and allows the floor cleaning
head to glide over fabric or carpet. (Fig.26)
Apply light consistent pressure and slowly pass it along
the surface (1’ per second) to insure the area being
treated has a chance to come to full temperature killing
pests and their eggs. (Fig.27)
Carpet
BEDS
Detail adaptor
90 Deg. jet nozzle
Fig.28
www.sylvane.com 1-800-934-9194
