CLEANING / MAINTENANCE
IMPORTANT : When storing the Vapamore, turn the machine off and unplug from
the wall outlet. After the machine has cooled (aprox. 15 min), hold the steam gun trigger
down to release the remaining steam pressure.
CLEANING /STORAGE
Always ensure before cleaning or maintaining the Vapamore MR-100 Primo that it is
switched of and unplugged from the wall outlet. Only clean the outer surface with a
slightly, water moistened cloth. Do not use any cleaning agents, abrasives or alcohol
since they may damage the housing finish.
Fig.24
Lubricate the threads on the water tank cap with light oil or lubricating spray such as
WD-40 once every 3 months or when needed.
R
ACCESSORIES
!
or
The tank should be emptied before storing for any
extended period of time (30 days or more). To empty
the tank, make sure the Vapamore is completely cooled
down, remove the water tank cap and flip the Vapamore
upside down to drain any remaining water from the
tank. Leave the water tank cap off until the water tank
is completely dry. (Fig.24)
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
The steam gun, extension tubes, and floor cleaning head can be stored (as
shown on the cover page of this instruction manual) by inserting the tab on the floor
cleaning head into the slot located on the side of the Vapamore.
!
Parts, extension tubes and accessories can also be stored in the supplied mesh storage
bag.
Replacement accessories and parts are available to order online at vapamore.com or by
calling Vapamore at 480-951-8900.
STORAGE
The included micro fiber cover and cotton cover can be machine washed using normal
detergents and wash cycle.
www.sylvane.com 1-800-934-9194
