REFILL / CLEANING / STORAGE
GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
WARNING: Hot steam may escape when opening the cap if the machine is not
!
CLEANING / MAINTENANCE
IMPORTANT :
Always ensure before cleaning or maintaining the Vapamore MR-75 Amico that it is
unplugged from the wall outlet. Only clean the outer surface with a slightly, water
moistened cloth. Do not use any cleaning agents, abrasives or alcohol
Fig. 17
Lubricate the threads on the water tank cap with light oil or lubricating spray such as
WD-40 once every 3 months or when needed.
R
The tank should be emptied before storing for any
extended period of time (30 days or more). To empty
the tank, make sure the MR-75 is completely cooled
upside down to drain any remaining water from the
is completely dry. Fig. 17
STORAGE
The included small cotton covers can be machine washed using normal detergents
and wash cycle.
The tank must be filled up when the steam flow emitted starts to decrease. Turn off
the MR-75 Amico by unpluging from the wall outlet. The red operation pilot light will
be off. Allow the unit to cool down for at least 15 minutes. Press the steam trigger to
release any remaining steam pressure. Open the tank cap by pressing down and turning
counter - clockwise.
Add water using the measuring cup / funnel then carefully close the tank cap again by
pressing down and turning clockwise untill fully tight. The MR-75 Amico can now be
plugged in. The unit is ready for use as soon as the red pilot light turns to green.
When storing the MR-75 Amico, unplug from the wall outlet and let
the unit cool down. After the unit has cooled, hold the steam trigger down to release
any steam pressure remaining.
PROBLEM?
IMPORTANT :
TROUBLESHOOTING
GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
What do I do if the machine or an accessory becomes damaged or broken?
Visit www.vapamore.com for a complete list of parts and accessories available for
purchase or simply call us at 480-951-8900 or E-mail us at [email protected] to
purchase replacement parts or schedule a repair. WE ARE HERE TO HELP...
TROUBLESHOOTING
One of the ETL protection devices has been triggered or the power cord has been
Call us at 480-951-8900 or E-mail us at [email protected] to schedule a repair.
Do not return to the place of purchase for warranty or repairs. Only
damaged.
The tank could have a build up of lime scale due to the use of hard water.
The tank must be de scaled by using a chemical de scaler . All chemicals must be
removed from the water tank before the machine is operated. Anything other than 100%
pure water inside the tank during operation could cause permanent failure of damage
and can be very unsafe to operate.
Vapamore is authorized to facilitate all repairs to keep the highest quality and ETL
standards. Repairs or tampering by any other party will void the Warranty.
The water tank is low or empty.
Refill the water tank.
Summary of Contents for MR-75 Amico
Page 1: ......
