MAINTENANCE AND STORAGE
GO TO VAPAMORE.COM TO SEE THE MR-500 VENTO INSTRUCTIONAL VIDEO
Fig. 23
Besides regularly changing the dust collection bag as covered earlier under “Using your
MR-500 Vento” there are other maintenance items that must be done to ensure maximum
performance and life of your vacuum. These include cleaning or replacing the vacuum
MAINTENANCE
compartment. It protects the motor from dirt particles.
or by calling Vapamore at 480-951-8900. Do not operate
void the motor warranty. Fig. 23-24
VACUUM MOTOR FILTER
HEPA FILTER
replace cover. Fig. 25
BLOCKAGE
cover release
grill cover
grill cover
Fig. 24
Fig. 25
release tabs
Fig. 26
Low suction
can be due to
blockage
Low suction or poor pick up can be due to a blockage or
heads or tools. Check each part until the blockage or
restriction is found and cleared.
ALWAYS DISCONNECT THE VACUUM FROM THE
ELECTRICAL OUTLET BEFORE ANY SERVICE OR
MAINTENANCE WORK.
Contact Vapamore at 480-951-8900 or
[email protected] for any technical questions, user
information or service issues.
With the vacuum on check the hose handle inlet for
proper suction. If suction is low at the handle inlet,
clear the restriction in the hose handle, hose, hose socket,
suction is 100% at the hose handle inlet then the
blockage or restriction could be located in the extension
blockage or restriction. Fig. 26
e
e
PROBLEM?
IMPORTANT :
TROUBLESHOOTING
GO TO VAPAMORE.COM TO SEE THE MR-500 VENTO INSTRUCTIONAL VIDEO
What do I do if the machine or an accessory becomes damaged or broken?
Visit www.vapamore.com for a complete list of parts and accessories available for
purchase or simply call us at 480-951-8900 or E-mail us at [email protected] to
purchase replacement parts or schedule a repair. WE ARE HERE TO HELP...
TROUBLESHOOTING
One of the ETL protection devices has been triggered or the power cord has been
Call us at 480-951-8900 or E-mail us at [email protected] to schedule a repair.
Do not return to the place of purchase for warranty or repairs. Only
damaged.
Vapamore is authorized to facilitate all repairs to keep the highest quality and ETL
standards. Repairs or tampering by any other party will void the lifetime Warranty.
Vacuum does not turn on.
vacuum
vacuum
The thermal protector has been triggered due to a blockage in the hose, hose handle,
call us at 480-951-8900 or E-mail us at [email protected] for repair
In this case you must unplug the vacuum, remove the blockage and let the vacuum
sit unplugged. Within 30 minutes the thermal protector will cool and reset. If the vacuum
does not restart,
Vacuum has little to no suction.
See sections titled, BLOCKAGE, FILTER BAG, VACUUM MOTOR FILTER.
drive belt is damaged or worn.
Make sure the hose is plugged into the socket and the handle properly. Allow the
vacuum to cool per the “thermal protector section”. Make sure the foot switch in the on
setting. Contact Vapamore for help replacing the drive belt at 480-951-8900 or E-mail
QUESTIONS? WE ARE HERE TO HELP.
CONTACT US FOR HELP AT 480-951-8900 OR E-MAIL US AT [email protected]
