background image

SAFETY INFORMATION

1. Make sure the power outlet is rated to correct voltage for the MR-50 
Steam - Vac.

2. Do not leave the MR-50 Steam -Vac unattended when plugged in to wall 
outlet.

3. Use the MR-50 Steam - Vac only for its intended use and only as described 
in this users guide.

4. Never operate the MR-50 Steam - Vac in dry steam or wet steam modes 
without water in the tank.  This can cause permanent damage to the water 
pump and void the warranty.

5. Never operate the MR-50 Steam - Vac with a damaged power cord. 

6. Do not handle the MR-50 Steam - Vac with wet hands.

7. Never allow water / liquid level in the removable dust collection reservoir to 
fill past the MAX level. 

8. Do not use without the water tank cap in place.

9. The MR-50 Steam - Vac is for residential use only.

10. The MR-50 Steam - Vac emits steam and may heat up some areas of the
unit during use. 

11. Always make sure the dust collection reservoir and dust collection filter 
are in place before use.

12. Always operate the MR-50 Steam - Vac in a horizontal position when 
extracting liquid. 

13. When operating do not turn the MR-50 Steam - Vac upside down.

14. Never use the power cord for carrying or lifting the machine.

15. Use close supervision when used around children. 

16. Never immerse the MR-50 Steam - Vac in water or other liquids.

17. Never fill the water tank with anything other than water. Using any 
additives such as cleaners or perfumes will damage the machine and void 
the warranty.

18. Do not overfill the water tank. Use measuring cup and fill to MAX line
on tank. 

19. Do not put hands or body parts over the steam outlet or into the vacuum
inlet. 

1

(

Read and understand all safety information before using the 

MR-50 Steam - Vac)

Summary of Contents for MR-50







Reviews: