GETTING STARTED
FRONT & REAR WHEEL INSTALLATION
Install the rear wheels using the supplied tool along
with the supplied wheel bolts ,and washers.
There is
Once unpacked the items that need to be installed are the front & rear wheels, storage
basket with upright handles, front carry handle and cord hooks. All the necessary tools
and hardware are included to install these items.
Fig.1
BASKET & UPRIGHT HANDLES
Fig.2
The basket and handles are secured to the main steamer
using 6 supplied screws and 2 plastic spacers. (NOTE:
There are extra screws provided in the bag for backup).
Align the basket and handle screw hole locations and
insert the supplied screws loosely until all screws are in
place. The lower mount will also use the plastic spacer
between the handle and the steamer.
Once everything is in place secure all the screws with the
supplied Allen tool. (Fig.2)
Install the front wheels using the supplied tool along
with the supplied wheel bolts, and washers. There
are 4 bolts and 4 washers per wheel. (Fig.1)
CARRY HANDLES & CORD HOOKS
Upper Handle Bolt
Spacer Lower Bolt
Attach the carry handles using the two supplied bolts for each handle, then tighten with
the supplied Allen tool. The cord hooks screw onto the studs located on the back of the
machine. Push inward to tighten the cord hooks. The cord hooks rotate by pulling
outward from the steamer then twisting to rotate. Use this rotate function to easily remove
the power cord and to position the hooks for cord storage. Use the Velcro cord strap to
secure the cord during transport. (Fig.3)
Fig.3
Vapamore
!
!
the steam gun trigger down for 15-20 seconds to release the air trapped in the boiler.
Cord
Hook
Cord
Hook
Front Carry Handle
Top Carry Handle
Front Wheel x 4 Bolts
Wheel bolt
Washer
Rear
Wheel
one bolt and one washer per wheel. The rear wheel
bolt threads into the wheel mount. (Fig.1)