Vanucci VAG-4, Instructions For Use Manual

Page: 16 / 68

16
4 | Correct use
4.1 | Safety checks
It is essential that the following instructions be observed, as this is the
only way to ensure that the original protective capacity of the gloves is
maintained.
Never use solvents or other aggressive substances for cleaning.
Contact with unapproved substances or incorrect care of the gloves may
significantly affect their features and reduce the protection they provide.
The gloves must not be dyed, nor may adhesive labels be attached.
No modifications to the product, however small they may seem, are
permitted.
Excessive twisting and/or bending (e.g. wringing out the glove) also
constitute incorrect handling because the product was not developed to
withstand these kinds of forces.
Such incorrect treatment as mentioned above may result in reduced
protection. At worst, the gloves may become ineffective.
Detlev Louis Motorrad-Vertriebsgesellschaft mbH (Switzerland: Detlev
Louis AG) cannot accept any claims for compensation or for repair
resulting from incorrect treatment.
The gloves should be checked for holes, tears, etc., every time they are
worn. If you notice any damage to the gloves, you must replace them.
Also check that the knuckle protectors are undamaged and securely
attached to the gloves. Check that the hook-and-loop fasteners are clean
and function properly and securely.
As soon as your gloves or parts of the gloves start to show signs of
wear, it is time to replace them.
A fall and/or crash may damage important components of the gloves,
so they will no longer provide the limited protection described above.
Such damage may not be visible to the naked eye. You should therefore
always replace your gloves after a fall.
4.2 | Label
The gloves come with a production label for clear identification and
traceability.
Art. No. 201234
05-2018
1234/012345
XXX
item number
Date of manufacture
Manufacturer
number/order number
Country of manufacture