- 16 -
5.2.2 Loop Recording
With a memory card inserted, the camera will (by default) immediately
start loop recording video when connected to a power source and
powered ON. If the device is not connected to a power source, it will not
immediately start on and record.
While recording, the record indicator will blink and a blue dot will flash on
the lower corner left of the screen. You can stop/start the recording at
any time by pressing the button.
By default, the Loop Recording Time is 3 minutes. Please go to "Record
Setup" ► "Loop Recording" to change it to 1 min, 2 mins, 3 mins, 4mins or 5
mins for your need.
The loop recording video file name format is "Year_Date_Time_E.MP4”. For
example “20211228_140633_0001_E_A.MP4”. The suffix A indicates front
cam recorded files, while the suffix B refers to rear cam recorded files.
Standard files are stored in the "Video/Normal" folder. When normal video
folder memory reaches 70% of the current memory card's total capacity,
the new loop video file automatically overwrites the first loop video file.
When Loop Recording is turned off, the camera will record video in 15
minute clips, but will not overwrite old videos when the storage card is full.
11-12-2021
