Vantrue N1 PRO, User Manual

Page: 12 / 113

- 11 -
Press OK button to enter the settings, and press UP/DOWN button to
select setting items.
- Resolution: Default setting is 1920X1080/30FPS (fps: Frames per Second).
Press Down button to select 1280x720/30FPS.
- Loop Recording: Default setting is 3 mins per video clip. Press Down
button to select among 1 min, 3 mins, 5 mins and OFF.
- G-Sensor: You can choose among 1, 2, 3, 4, 5 and Off. G-sensor
is the most sensitive when set to 5.
- Audio Recording: Default setting is ON. Press Down button to
select OFF.
- Parking Mode: Default setting is OFF. Press Down and OK button to
turn it ON/OFF.
- Exposure: Default setting is 0. Press Down button to select among +2.0,
+1.0, +0.0, -1.0, -2.0
- Number plate: Default setting is OFF, Press Down and OK button to
set your car number.
- Stamp: Default setting is Date/Time Stamp, Logo Stamp, Number
Stamp, Speed Stamp, GPS Location Stamp, Press OK button to turn off/
on the stamp.
- Rotate Display: Default setting is OFF. Press OK button to turn it ON/
OFF.
- Time Lapse: Default setting is OFF, Press Down Button to select
among 1 sec, 5 secs, 10 secs and OFF.
- Power Off Delay: Default setting is ON, the camera will auto end
recording and turn off when you shut off the car. Press Down
button turn it OFF to disable it.
-Language: Default setting is English. Press OK button to select among
Engish/Français/Español/Deutsch/Italiano/
简体中文
/русский/
日本語
/Polski.