Vantrue Element 2, User Manual

Page: 27 / 309

- 22 -
EN
4.2. Specifications
4.2.1 Loop Recording
After inserting the memory card and connecting the power, the E2 dash
cam will automatically turn on and enter loop recording. The duration of
each recorded video will be saved based on the loop recording time
you set, saved in the normal video folder.
When the capacity of the normal video folder reaches 70% of the total
capacity, the new loop recording file will automatically overwrite the
original loop recording files. After this function is enabled, the video file
will automatically overwrite the loop, so as not to stop recording during
the driving process.
Note:
2.
1.
3.
4.
The normal operation of the loop recording function is very dependent
on the speed of the memory card, so please format the memory card
regularly to avoid problems such as excessive memory card files and
card aging that affect the normal loop recording.
Please check the loop recording video regularly to avoid the necessary
videos being overwritten by loop.
When Loop Recording is turned off, the camera will record video in 5
minute each clips, but it will not overwrite old videos when the storage
card is full.
After the loop recording is turned off, the duration of each video will be
20 mins. When recording until the memory card is full, the camera will
stop recording, and prompt "Card full!"