Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC35-APL | User Manual 41
3.5
GPIO Setup
VT-SBC35-APL implements 8GPIOs with details shown below:
Pin
Name
Default mode
Default level
J39.1
GPIO_0 board
Output
High
J39.2
GPIO_1
Input
/
J39.3
GPIO_2 board
Output
High
J39.4
GPIO_3
Input
/
J39.5
GPIO_4
Output
High
J39. 6
GPIO_5
Input
/
J39.7
GPIO_6
Output
High
J39.8
GPIO_7
Input
/
You can use the
GPIO Sample.exe
program under the directory of
SW Guide > GPIO
Test
> GPIO Sample
in the release package for GPIO debugging (to run as administrator).
In the above figure:
1.
You can select a GPIO pin from the drop-down of GPIO Pins for the configuration;
2.
Out: Set the mode of the selected GPIO pin as output (checked)/input
(unchecked);
3.
High: Set the level of the selected GPIO pin as high (checked)/low (unchecked).
