Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC35-APL | User Manual 32
3.3.2
Secure Boot
Secure Boot is firmware-dependent and requires that the computer BIOS is set to UEFI
mode.
1.
Power on the Board and press
ESC
to enter BIOS;
2.
Select
Administer Secure Boot
on the front page;
3.
Set
Erase all Secure Boot Settings
and
Restore Secure Boot to Factory Settings
to
Enabled
;
4.
Press
F10
to save and exit;
5.
There will be a dialog box indicating the system will be reset. Click
OK
, and the system
will reboot;
6.
If you need to disable Secure Boot, set
Enforce Secure Boot
to
Disabled
.
