Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-3399 | User Manual 28
3.
Select a Wi-Fi network from the list;
4.
Input the password of the access point and verify;
5.
You will connect to the access point after successful verification.
You can also connect a Wi-Fi network using commands.
1.
Input the following command in the terminal:
# nmcli dev wifi connect <SSID> password <PASSWD>
2.
Use the ping command to check if the network is connected properly
；
# ping www.baidu.com
3.
If the data packets are transmitted and received properly, the network is connected
properly.
