Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-3399 | User Manual 27
3.2
Ethernet Jack
Connect the Ethernet jack of the Board to the host PC with an Ethernet cable, then check
the settings of the Ethernet jack:
# ifconfig
Set a static IP address to the Ethernet jack and verify the IP address:
# ifconfig eth0 192.168.9.10
# ping 192.168.9.10
PING 192.168.9.10 (192.168.9.10): 56 data bytes
64 bytes from 192.168.9.10: seq=0 ttl=64 time=1.296 ms
64 bytes from 192.168.9.10: seq=1 ttl=64 time=1.358 ms
3.3
Wi-
Fi
VT-SBC-3399 supports Wi-Fi and Bluetooth functions. You are recommended to use nmtui
to set up the Wi-Fi network.
1.
Open a terminal in the console, and input the following command to set up the
network;
$ nmtui
2.
Use the arrows on the keyboard to navigate to
Activate a connection
and press
Enter
;
