background image

                                                     

VT-M2M-G335

 

All Rights Reserved 

conforming to the safety instructions.   

1.5  Limitation of Liability/Non-warranty 

For direct or indirect damage to this device or other devices of Vantron caused by 

failure of conforming to this manual or the safety instructions on device label, 

Vantron assumes neither warranty nor legal liability even if the device is still under 

warranty. 

The VT-M2M-G335 should be installed, debugged and maintained by professional 

people.   

The outside antennas are not permitted to be installed or to be changed by 

non-professional people. To run the device normally, only specify antennas are 

approved to be assembled together by professional people. 

Unit shall be used with indoor-use antenna only. No antenna for this unit can be 

installed outdoor. 

1.6  Safety Instructions 

 

Keep and comply with all operation instructions, warnings, and information.   

 

Pay attention to warnings on this device. 

 

Read the following precautions so as to decrease the danger of injury, electric 

shock, fire, or any damage to the device.     

 

1.7  Precautions 

 

Pay attention to the product labels/safety instructions printed on silk screens. 

 

Do not try repairing this product unless declared in this manual. 

 

Keep away from heat source, such as heater, heat dissipater, or engine casing.   

 

Do not insert other items into the slot (if any) of this device.   

• Keep the ventilation slot ventilated for cooling.

 

•System fault may arise if other items are inserted into this device.

 

 

Installation: ensure correct installation according to instructions from the 

manufacturer with recommended installation tools.   

 

Ensure ventilation and smoothness according to relevant ventilation standard.

 

 

1.8  Safety Instructions for Power Cables and Accessories 

Proper power source only 

Start only with power source that satisfies voltage label and the voltage necessary 

according to this manual. Please contact technical support personnel of Vantron for 

any uncertainty about the requirements of necessary power source.   

Summary of Contents for VT-M2M-G335
















Reviews: