VT-M2M-APL PLUS
Keep away from all energized circuits.
Operators should not remove enclosure from the device. Only the
group or person with factory certification is permitted to open the
enclosure to adjust and replace the structure and components of the
device. Do not change components unless the power cord is removed.
In some cases, the device may still have residual voltage even if the
power cord is removed. Therefore, it is a must to remove and fully
discharge the device before contact so as to avoid injury.
Unauthorized changes to this product or its components are
prohibited.
In the aim of avoiding accidents as far as possible, it is not allowed to
replace the system or change components unless with permission and
certification. Please contact the technical department of Vantron or
local branches for help.
Pay attention to caution signs.
Caution signs in this manual remind of possible danger. Please comply
with relevant safety tips below each sign. Meanwhile, you should strictly
conform to all safety tips for operation environment.
Summary of Contents for VT-M2M-APL PLUS
