Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
GAPL Edge Computing Gateway | User Manual
21
3.3.2
USB interfaces
Insert a USB device via any of the USB Type-A interfaces on the device.
Input the following commands to check/configure the USB interface.
1.
Check the information of USB interfaces:
$ lsusb
2.
Display details of the partitions on the USB device:
$ fdisk -l
3.
Mount a USB device to a specified directory (e.g., /mnt):
$ mount /dev/
xxx
/mnt
4.
Check the mounted content:
$ ls /mnt
5.
Unmount the USB device:
$ umount /dev/
xxx
3.4
Network
3.4.1
Ethernet
The Ethernet cards function in DHCP client mode by default. Use the $ip addr command
to confirm. The Ethernet card names for ETH1 and ETH2 are enp1s0 and enp2s0,
respectively.
Remember to connect either of the Ethernet jacks to a switch or server with an RJ45 cable.
You can access the Ethernet settings from
Settings > Network > Ethernet
, where you can
check the detailed information of the network and change the Mac address or assign a
static IP (Pv4/IPv6) address to the device.
3.4.2
4G/5G module
Insert an activated SIM card into the SIM slot before enabling the mobile connection.
Check the status of the modem:
# mmcli -L