Installation: NexStar 2 External 5.25” IDE Enclosure
15
6) Follow the directions on the installation page. Please note, you will need
your Windows 98SE Installation CD when installing the drivers.
7) Repeat the steps listed under “Connecting the NexStar 2 to your computer.”
Mac OS 9.0 or later - (NST-525U2, NST-525UF):
1) No drivers are necessary when using Windows ME/XP/2000. If the device
does not appear under My Computer, you may need to install drivers for the
5.25” device (not NexStar 2). Please refer to the 5.25” device’s instructions on
how to install its drivers.
Mac OS 8.6 - (NST-355U2, NST-355UF):
1) Unplug the NexStar 2 if you currently have it connected.
2) USB Mass Storage Support 1.3.5 must be installed on your system. If it is not,
you can download the USB Mass Storage Support 1.3.5 from the Apple
Software Updates website: http://www.apple.com/support
3) Follow the direction associated with the USB Mass Storage Support driver to
install
4) Repeat the steps listed under “Connecting the NexStar 2 to your computer.”
Note: Microsoft has declared that it will extend support for Windows 98 through June
2006. However, some of the information or links on the Windows 98 support page may be
outdated. Vantec is not responsible for any information, or lack thereof, on Microsoft’s
Windows 98 support page.
Note: If you are using Toaster as your CD recorder software in Mac OS 9.0 or 9.2, you must
install the USB 2.0 extension driver for Toaster. Please check http://www.roxio.com for
more information.
