Vantage Hearth Equinox 73-II, Installation

Page: 3 / 4

I N S T A L L A T I O N
©Vantage, 8/11/2016 / IS-00700-B Equinox 73-II LCD In-Wall Touchscreen – MODEL: EQ73TB-TI-II page 3 of 4
7. Scroll down to the next device screen for:

security sounder volume –

set security sound level from 0% to 100% - sound is on the
Equinox security pad display.

proximity sensitivity –

Adjust value between 1 and 5

Test by clicking the test circle and moving your hand across the
front of the screen. A green watermark bar appears across the
screen when the sensor activates.

multiple homes –

Selecting multiple homes allows this device to connect to more
than one home.
NOTE: multiple homes is covered in Design Center Help.
8. Scroll down to the next device screen for:

default profile –

When the device is reset, (power outage, etc.) this selects whether
the
first (enabled) profile in the profile list or the last (enabled)
used profile is active when the screen boots.

network settings –

Select dhcp or static *, see below if static is selected..

reset user settings / reload :

This will reload, (replace) all of the devices information from the
controller.
(network settings continued )
*
network settings / static :

ip address – xxx.xxx.xxx.xxx

netmask – xxx.xxx.xxx.xxx

default gateway – xxx.xxx.xxx.xxx

dns server – xxx.xxx.xxx.xxx

Click save when finished entering static IP information .
9. Scroll left to the info screen:

device information –

ip address : xxx.xxx.xxx.xxx

part number : xxxxxx

serial number : xxxxxxx

app version – xx.xx.xx (used in diagnostics)

kernel version – version and date (used in diagnostics)

rootfs version – xx.xx.xx (used in diagnostics)

up time : x day(s) x:xx

controller info –

controller ip – xxx.xxx.xxx.xxx

controller firmware : x.x.x.x

connection location : local

connection mode : multicast
Widgets Overview
For detailed information about all widgets and other
profile and settings screens, click on file link below to load Widget Instructions:
LINK: Equinox Widgets_install.pdf
Equinox 73-II Mounting Ring Adjustment Tool
Locate this
tool-card shipped with the Equinox 73-II. Inside the wall box is a rectangular
ring that must be parallel with the wall surface and 1” behind the wall surface on the left
and right sides. Loosen the two inside screws and use this tool to set the mounting ring
depth at 1”. See install sheet links on page 2 for install options.