SECTION 1 - DMM-4S(T) Quick Setup
DMM-4S(T)
DDM-4S
Digital Music Manager
Quick Guide
V39934 © 2009
Page 3
Step 3
- Power Up
After all of the connections have been made turn the power to the DMM-4S on by pressing the button in the
lower right-hand corner of the front panel. Wait for the system to boot up.
Step 4
- Install
Vantage DMM Client
Software
Install the
Vantage DMM Client
software on the computer that will be used to setup the DMM-4S Server. This
computer should be on the same network as the DMM Server.
NOTE: This is the most common interface used by the Vantage installer
for setting up the
DMM-4S Server
. This software may be downloaded from the Vantage Dealer site and is also
provided on the CD shipped with the DMM.
Step 5
- Identify DMM Server to Desktop Client
From the
Vantage DMM Client
software click on
File | Connect
. Click on
Scan for Vantage DMMs
to see all
DMM Servers on the local network. The DMM unit has a sticker on the back with the name of the DMM unit,
e.g.
DMM20F3
. Click on the name of the unit this session of the
Vantage DMM Client
will be interfacing with.
If more than one DMM unit is installed on the local network please note that it is only possible to connect to
one DMM unit at a time via the
Vantage DMM Client
software. However, multiple sessions of the
Vantage
DMM Client
software may be running simultaneously. To confirm which DMM the Vantage DMM Client
software is using do the following: Click on
Tools | Status & Messages | System Status
. Look at the
Host Name
and the
Host Address
to see the Name and IP address of the DMM Music Server.
If the installer is using the
Local User Interface
, the IP Address can be found by clicking on
Menu (bottom
right of VGA monitor) | System | System Status | Network Adaptors
. The screen will display connection
information including the IP address of the DMM.
Step 6
- Setup a Static IP Address
The DMM will automatically acquire a DHCP address on the network when powered up. The installer may
want to change the IP address to a static IP address (recommended). Follow these simple steps using
Vantage DMM Client
software to setup a static IP address.
1.
Click on
Tools | Settings & Functions | Network Configuration
2.
Click on
Use Static Address
3.
The same information used by the DHCP address may be used for the Static IP address
a.
If special network conditions exist it may be necessary for a trained network specialist to setup a
static IP address
Rather than using a static or DHCP IP address,
record
the IP address and the name of the DMM unit for
reference later.
Step 7
- Rip CDs
To rip CDs simply insert the CD into the front of the DMM Server to automatically start the ripping process.
Remember the default settings for ripping etc. on the DMM are the most popular settings. Two copies are
ripped automatically to the DMM. The Local Server version is a perfect copy of the CD with
no loss of digital
information
(the no loss settings cannot be changed) and simultaneously, an encoded version is copied using
the Ripping/Encoding settings and these settings may be custom defined.
Step 8
- Program TPT Touchscreens with Touchscreen Designer™
Programming a Vantage TPT Touchscreen to work with the DMM is literally about a 5-minute process. Using
Design Center software and Touchscreen Designer, simply drop the InFusion Media Music Component on
the Touchscreen design, add the IP address of the DMM and export the design. Please see
SECTION 5 - TPT
Touchscreens Setup
in the DMM User Guide.
