Vanner Power Group
SP0155 BATTERY CHARGER—OWNER'S MANUAL
— 2 —
V a n n e r P o w e r G r o u p
2B)
2B) Specifications
Specifications
Model No.
SP00155
Input:
15A at 120VAC ±10%, 60Hz
Output:
41A at 24VDC Nominal
DC Current Draw:
30 milliamperes (with no AC voltage applied)
Bulk Voltage:
28.6VDC Nominal
Float Voltage:
26.6VDC Nominal
Ambient Temperature:
-40 to +105°F (-40 to +40°C)
Cooling:
Forced Air, 100 CFM, 24VDC Fan with front to
rear air flow
Chassis:
Steel with durable painted finish
Weight:
35 lbs
Dimensions:
9.85" W x 6.70" H x 15.75" D
2C)
2C)
Standard Features
Standard Features
• Fully Automatic Operation with Three-stage Battery Charging
(Bulk, Absorption, and Float Stage Charging)
• One Year Warranty
• Over Current Protection of AC Input and DC Output to Protect Both the
Charger and the Batteries
• Durable Steel Enclosure
• 3 Status LEDs Describe the Status of the Charger (Green/Amber), or Over
Temperature/Shutdown (Red) Condition
SECTION 3:
Installation and Checkout
3A)
3A) Selection of Battery Charger Location
Selection of Battery Charger Location
• Charger should be located close to battery (but not in the same compart-
ment) for optimum performance (within 3ft.)
• Charger should be protected from weather. Install charger in compartments
that provide protection from direct water spray, dirt, or toxic vapor.
• Mounting compartment should be well-ventilated and allow adequate air
circulation for charger cooling (2" clearance around entire charger
recommended).
• Do not store flammable items near charger.
NOTE
NOTE
Charger should not
be installed in same
compartment as
batteries.
