VANNER
Incorporated
OWNER’S MANUAL
Vanner High Voltage Distribution Module OWNER’S MANUAL
7
Wiring Input/Output Specifications
Note:
Deutsch part number suffix (**) is dependent on wire gage and insulation diameter.
CAN and I/O Connector
Deutsch #DT13-08PA
For mating connector use
Deutsch #DT06-08SA
For terminals (size 16) use
Deutsch #1062-16-**77
Pinout Definitions
1 - +24V Input
2 - Ignition Signal
3 - CAN Shield
4 - CAN Low
5 - CAN High
6 - Spare
7 - Command Signal (Active Low)
8 - Ground
HVIL Connector
Molex #194290033
For mating connector use
Molex #19418-0007 (14 - 16 AWG)
or Molex #19418-0008 (18 - 22 AWG)
For terminals use
Molex #19420-0009 (14 - 16 AWG)
or Molex #19420-0010 (18 - 22 AWG)
Note:
HVIL connector is
mounted to this surface
for IAP
I
models.