www.ivankyo.com 2018-2019 VanTop, Inc. All rights reserved.
8
/
39
Locate the projector at an appropriate position, then adjust the focus ring and Keystone
(on the back side of the projector)
manually to get the best image performance.
Note:
Being too far or too close between the projector and the wall/screen, or the incorrect adjustment of the focus ring and Keystone may result in the poor image.
Projector Connections
When you connect any device to the projector, please follow the steps below at your first use of the projector.
Step 1:
Connect the power cord into the projector’s power inlet, then plug the power
cord into an electrical outlet;
Step 2:
Take off the lens cover, then press the
Power
button on the projector or the remote to turn on the projector;
Step 3:
Enter the interface of the
OSD Language
to set your preferred language;
Step 4:
Press the
Up/Down/Left/Right
buttons to select your language, then press the
OK/Enter
button of the projector/remote to confirm;
Step 5:
It will show a screen with
No Signal
. Insert the device/cables into the correspondingly ports on the projector;
Step 6:
Press the
button on the projector or the
Source
button on the remote to enter the interface of
Input Source
;
Step 7:
Press the
Up/Down
or the
Source
button, then press the
OK/Enter
button to select the correct input source.