www.ivankyo.com 2018-2019 VanTop, Inc. All rights reserved.
37
/
39
*Make sure all cables are plugged correctly and firmly
*Make sure you select the right input source. For example, if you insert a USB drive, please select
USB
in the interface of
Input Source
*USB 2.0 disk is supported on this projector. If a USB 3.0 is connected, it will only show
No Signal
.
4. How Can I do if the Image is Blurry or Out of Shape?
*Adjust the focus and keystone ring by moving it leftward/rightward till it shows the best images
*Place projector on a flat surface horizontally or vertically. An inclination of any angle may result in blurry displays or uneven colors
*Darker environment suggested achieving the best projecting performance
*The eligible distance of 1.16m-5m/32inch-170inch between the projector and projecting screen/wall
*Projecting wall or screen is clean white if possible.
5. How Can I Do if the Image is Up Side Down?
*Enter
Menu-Picture-Projection Direction
to flip the projection image accordingly.
6. How Can I Do if the Projection Screen is Not Square or Allied Horizontally
*Make sure the projector is placed on a flat surface with projector light in the middle of the screen.
*Make sure the projector screen is placed horizontally.
7. How Can I Do if there is Color Distortion?
*Make sure the video source has a fine resolution.
*Adjust the colors: enter
Menu
-
Picture
-
Color Temperature
, then select different modes and adjust the value accordingly.
*Reset the projector to manufacturer setting: enter
Menu
-
Option
-
Restore Factory Default
to reset.
8. How Can I Do if the Remote is Unresponsive?
*Make sure the batteries are installed correctly and the power is enough.
*The remote works with the projector through the IR receiver. The remote works only when the IR receiver is within the direct reaction distance and will be unresponsive if the IR receiver
is blocked or covered.
9. How Should I do if There are Small Dots on Display?
