4. 2. Set Up the Router as an Access Point
The router can work as an access point, transforming your existing wired network to a
wireless one.
Before Installation Please complete the following settings:
1) After disconnecting the WAN port. Connect a device to your Juplink router and launch a
web browser. Then Log In to Your Router.
2) Click
Network
>
LAN
>
IP Address .manually set IP address as the following format
192.168.0.XXX (XXX is any number of 2~254) leave the Subnet Mask as the default settings.
After Click
Save/Apply
button, you need reconnect the router and enter the address you set
to log in to the web UI instead of the default 192.168.0.1.
3) Connect the router to your existing wired router via an Ethernet cable as below sample.
