3
104431
OWNER’S MANUAL
PRODUCT
FEATURES
SAFETY DEVICE
This heater has a pilot with an Oxygen
Depletion Sensing (ODS) safety shutoff
system. The ODS/pilot is a required feature
for vent-free room heaters. The ODS/pilot
shuts off the heater if there is not enough
fresh air.
PIEZO IGNITION SYSTEM
This heater has a piezo ignitor. This system
requires no matches, batteries, or other
sources to light heater.
THERMOSTATIC HEAT
CONTROL
This heater has a thermostat sensing bulb
and a control valve. This results in the great-
est heater comfort. This can also result in
lower gas bills.
PRODUCT
IDENTIFICATION
Figure 1 - Vent-Free Gas Log Propane/LP Gas Space Heater
1.
Remove heater from carton.
2.
Remove all protective packaging ap-
plied to heater for shipment.
3.
Make sure your heater includes two
hardware packets.
4.
Check heater for any shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
ASSEMBLY
ASSEMBLING HEATER
Tools Required:
• Phillips screwdriver
• 5/16" hex wrench
• slotted screwdriver
Removing Front Panel Of Heater
1.
Remove two screws near bottom cor-
ners of front panel with Phillips screw-
driver.
2.
Pull bottom of front panel forward, then
down (see Figure 2) .
Figure 2 - Removing Front Panel of Heater
Figure 3 - Attaching Ignitor Cable to Piezo
Ignitor
Continued
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
SDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'ASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
SDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'ASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIG
LFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'f
ASDFKIGLFJI alskdidkoem
kgo dkirlnfgpd'fASDFKIGLFJI alskdidkoemkgo dkirlnfgpd'f
Ignitor Button
Screen
Front
Panel
Heater
Cabinet
Log
Lighting and
Warning Plates
Control Knob
Installing Log
Note:
For easier installation, lay heater on
its back.
1.
Remove log from inside top of heater.
Discard protective packaging.
2.
Attach ignitor cable to piezo ignitor
(see Figure 3).
3.
With Phillips screwdriver, remove four
screws holding screen in place. Re-
move screen.
4.
Gently slide log between log retaining
brackets on deflector assembly (see Fig-
ure 4, page 4). The log should fit firmly
against bottom of log retaining brackets.
5.
Reattach screen using four screws re-
moved in step 3.
Note: Do not remove
Lighting and Warning
Plates from heater
UNPACKING
CAUTION: Do not remove the
metal data plates attached to the
heater base assembly. The data
plates contain important warranty
information.
Piezo Ignitor
Ignitor
Cable