1. Remove 4 fasteners (
A
, Figure 136) to release the oil
supply pump gerotor cover (
B
) from crankcase cover (
C
).
136
2. Remove o-ring (
A
, Figure 137) from the crankcase cover
groove.
137
3. Remove inner and outer gerotors (
B
) from the gear shaft.
4. Remove oil filter screen (
C
).
5. Remove roll pin (
A
, Figure 138) from hole in gear shaft.
138
6. Remove crescent ring (
B
) from the groove on the gear
shaft.
7. Remove thrust washer (
C
) from gear shaft.
8. On the opposite side of crankcase cover, remove gear
shaft assembly from crankcase cover.
Oil Guard Oil Scavenge Pump - Removal
Remove the oil scavenge pump from the crankcase cover as
follows:
108
Summary of Contents for BIG BLOCK M540000
