Vanguard Instruments VBT-75 S2, User Manual, Page: 10 / 16

REV 1 VBT-75 S2 USER’S MANUAL
7
3.0 OPERATING PROCEDURES
3.1 Set the Date and Time
Follow the steps below to set the date and time for the VBT-75 S2's internal clock:
a. Start from the "START-UP" menu:
Turn the
[CONTROL KNOB]
until the SETUP option is enclosed in brackets as shown
below:
Press the
[CONTROL KNOB]
.
b. The following screen will be displayed:
The SetTime option should be enclosed in brackets. Press the
[CONTROL KNOB]
.
c. The following screen will be displayed:
Turn the
[CONTROL KNOB]
to select the first digit of the month and then press the
[CONTROL KNOB]
. The cursor will move over to the second digit of the month.
Continue this process to enter the date and time. When you press the
[CONTROL
KNOB]
for the last time to set the second digit of the current minute, the date and
time will be set and you will be returned to the "START-UP" menu.
ENTER
MM-DD-YY HH:MM:SS
_
[SetTime ] LANGUAGE
LCD CONT EXIT
CABLE VTG: 0V
RUN TEST 07/06/17
[ SETUP ] 11:03:05
CABLE VTG: 0V
[RUN TEST] 07/06/17
SETUP 11:03:05
CABLE VTG: 0V