ATO-
250™ Operating Procedures
13
b.
To restore a record, press the number one
key.
c.
Press the number two key to scroll
through test record.
d.
Press the number one key if the record
number that is to be restored is known. The
record number entry prompt will appear:
e.
Key in the record number and then press
the ENTER key to restore the desired
record. The RECORD RESTORED
message will display:
f.
When the record is restored, press the
ENTER key to review the restored record or
to print the review record. The menu below
displays:
g.
Press the number one key to scroll
through the list of records, as shown below.
Alternately, the PRINT TEST RECORD can
be selected by pressing the number two key,
which will printout the test record and return
to the START-UP menu.
h.
When the list scrolls to the record of
interest shown on the above display, press
the ENTER to display the date and time of
the test, shown next):
i.
After observing the correct date and time
for the selected test, press the ENTER to
display the complete test record, shown
below:
j.
When the stored record is viewed, press
the ENTER key to return to the START-UP
menu.
If there are multiple test results, Press the
key to display the next test. Press the
key
to display the previous test.
This completes the main procedure to
restore a record.
NOTE
The above test record has one test result.
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT
RESTORE RECORD
NUMBER:
RECORD RESTORED!
REVIEW RECORD
1.SCROLL TEST RECORD
2.PRINT TEST RECORD
RECORD ID INFO:
1 TESTS
MM-DD-YY HH:MM:SS
TEST NUMBER 1
TEST CURRENT: 100 A
105 MICRO-OHMS