ATO-
250™ Operating Procedures
15
a.
On the SETUP menu, press the number
three key (RESTORE RECORD), which
will display the following menu:
b.
Select the number two key
(DIRECTORY) to show the menu below:
c.
Press the one key to print a list of all the
test records.
d. Press the number two key to print the last
ten records stored inside the memory.
Following the selected printout, the display
returns to the START-UP menu.
A typical test record directory print out is
shown in Figure 7.0.
Figure 7.0 Typical Test Record Directory Print Out
16.0 Erase Record Procedure
The following procedure allows the user to
erase one, multiple or all records stored in
the FLASH EPROM.
Beginning at the START-UP menu, press
the number two key (SETUP) to display the
second setup menu shown adjacent:
1.ENTER ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
1.RESTORE RECORD
2.DIRECTORY
3.ERASE RECORDS
PRINT DIRECTORY
1. FULL DIRECTORY
2. SHORT DIRECTORY
