ATO-
250™ Operating Procedures
14
14.0 Review Record Procedure
The user can review a test record residing in
the working memory by using the following
procedures.
From the START-UP menu, press the
number two key (SETUP) to display the
second SETUP menu, shown below:
a.
Press the number two key (REVIEW
RECORD) to display the following menu:
b.
Press the number two key to print the test
result. A typical test result printout is shown
in Figure 6.
c.
Press the number one key (SCROLL
TEST RECORD) to review all test records
inside the memory.
d.
See step
12.g
to view the test record.
14.0 Computer Interface & Set Time
The user is required to put the ATO-250
under computer interface mode to retrieve
test records to a personal computer.
Beginning at the START-UP menu, press
the number two key (SETUP) to display the
second menu shown below:
a.
Press the number four key (NEXT PAGE)
to display the following options menu:
b.
Press the number one key (COMPUTER
CONTROL) to allow the ATO-250 to be
controlled by an IBM-compatible personal
computer. The computer interface (ITF)
mode advisory will display:
d.
To end the Computer Interface mode,
press the STOP key, at which time the
display will return to the START-UP menu.
e.
To set the date and time, press the number
two key (SET TIME) from step
a.
f.
To
set the date, consisting of the month,
day and year will only require six key
selections.
g.
To set the time in the format of hour,
minute and seconds, simply press the six
necessary buttons on the keypad. When the
date and time are correctly set, press the
ENTER key to return back to the START-
UP menu. This completes setting the date
and time procedure.
15.0 Print Record Directory
Beginning at the START-UP menu, press
the number two key (SETUP) to display the
second setup menu shown below:
1.ENTER ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
REVIEW RECORD
1.SCROLL TEST RECORD
2.PRINT TEST RESULT
RECORD ID INFO:
1.ENTER ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
1.COMPUTER CONTROL
2.SET TIME
COMPUTER ITF MODE
ENTER
MM-DD-YY
HH:MM:SS
1.ENTER ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
