VG-PB200W 200W LED Fresnel Spot light User Manual VG-PB200W 200W LED Fresnel Spot light User Manual
similar rigging structure in any orientation using a rigging clamp.
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Ⅴ
CONTROL PANNEL
B
UTTON
MENU
UP
DOWN
ENTER
Call the main menu, or escape the current menu, (i.e. return to the
upper menu and give up the selected item or parameter).
Browse the menu item forward or increase the parameter.
Browse the menu item backward or decrease the parameter.
Confirm the selected item or parameter, (i.e. enter into the next menu,
or escape the current menu and save the selected item or parameter).
M
AIN
M
ENU
The way into the menu as below:
1. Press
ENTER
when the display show the title information;
2. Press
UP
or
DOWN
button to choose the right menu which you need;
3. Press
ENTER
into the menu;
4. Press
UP
and
DOWN
button to set the parameter or setting;
5. Press
ENTER
to save the setting;
6. Press
MENU/SET
button to back.
MENU
M
AP
LCD SHOW
Function Instruction
Operation of
Buttons
Supplementary
Instruction
T=xxxC
◆
The temperature of LED
bulb radiator in real time
(Celsius)
◆
If there is no this
temperature shows, means
the temperature sensor
failure
◆
If the value over 80,
please check the wind path
is normal or not
No Signal
Couldn't receive the DMX
512 signal
RX DMX
Received the DMX 512
signal
RX Slave
Slave mode
You only need
set a master
light, the slave
light will be
identified
automatically
You need pull off the
DMX signal from
console under
master/salve mode
Address
Address setting
Press
UP
,
DOWN
button
to set the
address you
need, then
press ENTER
06
07
