V&P Scientific, Inc.
3
Technical Note 370B
3.
Place the cylindrical Enclosure on top of the motor unit, making sure that it rests firmly
in the groove.
4.
Place the Lid on top of the Enclosure also making sure it is resting firmly.
5.
Insert the Tubing Support Straw into the hole in Lid and position it close to the bottom
of the SpinVessel®. Tighten the thumb screw on the lid to hold the Support Straw in
place.
6.
Then insert the aspiration tubing bundle of the plate dispenser into the Tubing Support
Straw. Push the bundle until the tubing anchor is just visible at the bottom of the
Tubing Support Straw but not touching the bottom of the SpinVessel®.