V&D Electric Bikes Go-Bike Q1, User Manual, Page: 20 / 28

1.5 Safe use specifications
• 5.1 Charging method
• The first step: the charging port is on the left side of the battery, as shown on the right;
• Step 2: Plug the charger charging port into the charging port on the battery (make sure the charging interface is
dry);
• Step 3: The indicator light on the charger is red, indicating that it is charging; when the indicator changes from red
to green,
• Indicates that the battery is fully charged. Please stop charging at this time, and charging for a long time will affect
the battery life;
• Step 4: After charging is completed, you need to cover the charging port cover to avoid water ingress.
• 5.2 safe charging specification
• • Charge the battery for at least 5 hours before first running.
• • To maximize battery life, charge once a month or 2 days after each ride. Please charge at a suitable temperature.
• • Failure to charge on time may result in damage to the battery. As time goes by, the battery will gradually run out
of light, eventually causing the battery to be over-discharged.
• • Use the battery, charger, and cable supplied by the original manufacturer. In order to avoid battery overcharge, it
is dangerous.
• • Make sure the charger cable is properly connected and has adequate ventilation.
• • Be sure to use it in a dry environment. Never allow the charger or cable to come into contact with water as this
may result in electric shock. Never touch with wet hands. Unplug the power cord immediately if any problems
occur during charging.
• • Be sure to pull out the plug and do not pull the plug out of the cable.
• • Do not allow the charger or cable to touch sharp or hot items.
• • Perform a visual inspection of the cable for the charger and charger on a regular basis.
• • If the charger or cable is damaged, do not use the charger to avoid further damage
7 20