6000 COUNTS DIGITAL MULTIMETER
USER'S MANUAL
9
2.3 Keypad
2.3.1
SELECT
（
1
）
When the meter is turned off and the rotary switch is not in position of OFF, press
SELECT
key for 2 seconds
to turn on the meter and press the key once more >2sec. to turn the power OFF.
（
2
）
At
EF/VOLT
position
Switches between Auto scan mode, AC and DC voltage, Non-contact electric field detector (EF mode).
（
3
）
At
Ω
position
Switches between Auto scan mode, Resistance measurement,
Continuity check, Diode Test and Capacitance
measurement.
（
4
）
At
A mA
μ
A
position
Switches between Auto scan mode, DC and AC current.
（
5
）
Power-up Option
Disables automatic power-off feature.
2.3.2
RANGE
At ACV, DCV,
Ω
, , A, mA and
μ
A
1. Press
RANGE
to enter the manual ranging mode.
2. Press
RANGE
to step through the ranges available for the selected function.
3. Press and hold
RANGE
for 2 seconds to return to autoranging.
2.3.3
HOLD
Press it to enter the Data Hold mode. Used to maintain the measurement data unchanging, by pressing the key
again it will exit the Data Hold mode.
Pressing this key and last for 2 seconds,the meter will delay for 6 seconds,than enters HOLD mode.
2.3.4
~Hz
During the voltage or current measurements, by pressing
~Hz
key the meter will enter the linear frequency
measurement state. At this time what being measured is the frequency of voltage or current. By pressing this key
